Mount 0.2(KW) motor on the motor stand and fill about 80% of the tank with a rubber adhesive. Adhesive concentration changes from maker to maker , so dilute thick adhesive properly with thinner. Then turn the pulley of the machine right. Adhesive will rise up to the adhesive furnishing roller. A uniform thickness of adhesive can be applied automatically to the under?side of a material.

Technical data

・Cementing width : 25 (mm)

・Adhesive : rubber

・Cementing surface : under side of the material

・Working speed : 10 〜13 (m /min)

・Dimension : 230L×390W×260H (mm)

・Weight : 32 (kgf)

・Motor required : 0.2 (KW)