Mount the motor on the motor stand and fill about 80 % of the tank with a rubber adhesive. Adhesive concentration changes from maker to maker, so dilute thick adhesive properly with thinner. Then turn the pulley of the machine right. Adhesive will rise up to the adhesive furnishing roller. A uniform thickness of adhesive can be applied automatically to the under?side of a material.

Technical data

・Cementing width : 500 (mm)

・Adhesive : rubber

・Cementing surface : under side of the material

・Working speed : 10 〜13 (m /min)

・Dimension : 265L×1070W×280H (mm)

・Weight : 77.5 (kgf)

・Motor required : 0.3〜0.4 (KW)